Maxtor QUICKVIEW ATA Manual do Utilizador descarregar pdf (Página 48)

SATA Bus Interface and ATA Commands

Maxtor QuickView 400/500GB Serial ATA Hard Disk Drive 5-11

7: 1 = release interrupt enabled

6: 1 = look-ahead enabled

5: 1 = write cache enabled

4: Shall be cleared to zero to indicate that the PACKET Command feature set is

not supported.

3: 1 = Power Management feature set enabled

2: 1 = Removable Media feature set enabled

1: 1 = Security Mode feature set enabled

0: 1 = SMART feature set enabled

Command set/feature enabled.

15-14: Reserved

13: 1 = FLUSH CACHE EXT command supported

12: 1 = FLUSH CACHE command supported

11: 1 = Device Configuration Overlay supported

10: 1 = 48-bit Address features set supported

9: 1 = Automatic Acoustic Management feature set enabled

8: 1 = SET MAX security extension enabled by SET MAX SET PASSWORD

7: See Address Offset Reserved Area Boot, INCITS TR27:2001

6: 1 = SET FEATURES subcommand required to spin-up after power-up

5: 1 = Power-Up In Standby feature set enabled

4: 1 = Removable Media Status Notification feature set enabled

3: 1 = Advanced Power Management feature set enabled

2: 1 = CFA feature set enabled

1: 1 = READ/WRITE DMA QUEUED command supported

0: 1 = DOWNLOAD MICROCODE command supported

Command set/feature default.

15: Shall be cleared to zero

14: Shall be set to one

13-8: Reserved

7: 1 = WRITE DMA QUEUED FUA EXT command supported

Table 5-2 Identify Drive Command Parameters

Word CONTENT DESCRIPTION

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 62 63

Sem comentários

Maxtor QUICKVIEW ATA Manual do Utilizador Página 48