Maxtor 4 CH Digital Multiplex Recorder Manual do Utilizador

9 CH Digital Multiplex Recorder776W_V 1.2Please read this instructions thoroughly before operation and retain it for future reference.User Manual47

Connect the AC Power Cord with Power Adapter and plug into an electrical outlet. The Red LED indicator light will be ON and the DMR is in Standby mode

PLAYPress “ PLAY ” button, the DMR will show the last recording.1. FAST FORWARD (F.F. ) & FAST REWIND (F.R.)You can increase the speeds of Fast Fo

The Menu allows you to configure your DMR settings. Please follow the steps below to access the Menu :Press the Menu button. The password screen will

MENU OPTIONSSYSTEM91. AUDIO INPUTTo choose one of 9 channels to record. (only can select 1 during operation for recording)2. INT AUDIBLE ALARMTo set t

11. NEW PASSWORD : XXXX (Default password : 0000)To set the new password.12. CLEAR HDDDelete all the contents of your HDD. When you choose “YES” on th

11TIMER1. DAYSelect the day, or days of the week (Mon–Fri / Sat-Sun / Daily) that you wish to schedulethe DMR to automatically record.NOTE :1.Special

12(MENU)SEARCHTIMER► RECORD CAMERA SYSTEMEVENTNETWORK(MENU)SEARCHTIMERRECORD► CAMERASYSTEMEVENTNETWORKRECORD1. HDD OVERWRITESelect “YES” to ove

MOTION DETECTION SETUP1. Press Press ““MENU MENU ““to enter the menu set up, then to enter the menu set up, then ““Down Down ””to CAMERA setup.to CAME

14Figure 1 MOTION DETECTION SETUP1234567 891011 12131415---- -- -- -- -- -- -- -- -- -- -- -- -- --03212 3 4 5 6 7 8 9 10 11 12 13 14 15---- -- -- --

NETWORK(MENU)SEARCHTIMERRECORDCAMERA SYSTEMEVENT► NETWORKPress the “▲”“▼” ”◄”“►”buttons to move the cursor.Press the “+” “-” buttons to change the dig

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alertthe user to the presence of uninsulated "dangerous

16HARDWARE CONNECTION AT DMR SIDENetwork Setting GuidePCPCX Direct Connect with PCXRemote Connect Via InternetCAMERACAMERAMONITORMONITOR

17STEP1: Software installation1.Put the attached CD into a CD-ROM and it will start to install the application program into PC.2. Press “Next”.STATIC

4.Set program shortcuts setting and press “Next”.5.Press “Next” to begin to copy files.6.After the installation, there are 6 files and 1 folder in yo

Step2 : Static IP setting In DMR MENU / NETWORK set IP ADDRESS, GATEWAY, NET MASK, DNS and WEB PORT which are provided from your local ISP ( interne

20Click twice and enter your User name, Password (Note : If you never change the “Account” before, the User Nameand Password are both “adm

DYNAMIC IP SETTING213.Choose destination location and press “Next”.Step1 : Software installation1.Put the CD into a CD-ROM and it will start to instal

4.Set program shortcuts setting and press “Next”.5.Press “Next” to begin copying files226.After the installation, there are 6 files and 1 folder in y

Step2 : DDNS apply1. Click on free site “http://www.dyndns.org” ( please look at the example below, you can also apply DDNS in other DDNS web page) an

3. Register the information and click on “Create Account”4.After registering your account, you will receive an e-mail, which contains instructions to

6.Click on“Account” and “Add Host”7 Users can set up their own DDNS HOST. For example, the user’s applied Host nameis “test,.dyndns.org”. And then pr

What do you getWhat do you get??‧ FEATURES ----------------------------------------------------------------------------------------‧ PACKAGE INCLUDING

2. Network setting for PC. (The instruction is based on Win XP O/S. If your O/S is Win 2000 or Win 2003, the setup procedure is similar to that of

4.Click on “INTERNET PROTOCAL (TCP/IP)” and then select “Properties”to setup5.Choose “Obtain an IP address automatically”6. Enter “Command Prompt”27.

8. Close the window in the above step. Enter the IP address ( router’s gateway : 192.168.1.1 ) to log in to the router from internet explore. And the

Step4 : Router settingNOTE : In the router setting, we have four steps as follows. 1. Dial setting2. DHCP setting3. Virtual server setting4. DDNS sett

3. In “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set “Port Number”to 80 for DMR. And set “Local Server IP Address” to 192.168.1.10. Pr

31In DMR MENU / NETWORK set SERVER IP, GATEWAY, NET MASK, DNS and WEB PORT. Step 5 : IP settingStep6 : Connect routerFor example(MENU)SEARCHTIMERRE

2. Click twice and enter your User name, Password and host (Note : The default User Name and Passwordare both “admin”). Then click OK to c

Step 1：Click twice to enter Login setup (please refer to page 21“software installation”)Step 2：Key in “User Name” and “ Password”. Click “OK” to estab

admin2004-NOV-18 15:58:3634A. Video Web Server control panel1. Image transmission rate per second2. Data transmission rate3. Connection/Disconnection4

B. Digital device control panel1. CH1-92. 4cut, 7cut, 9cut, PIP3. Zoom, Select, Lock, Record4. Stop, Rewind, Fast Forward , Pause, Slow, Play 5. Menu(

Advanced OperationAdvanced Operation‧ OPERATION OPTIONS --------------------------------------------------------------------‧ KEY LOCK --------------

Please find a recording file in the PC and click twice on it to playback.1. On Screen Display2. Snapshot3. Stop4. Pause5. Slow (1/2X, 1/4X,1/8X,1/16X,

ADVANCED SETTINGClick “System Config” for advanced setting.SYSTEM CONFIGNOTE :Apply--After changing all setting, press “apply” to refresh the data.Reb

381.Get all the data from the ISP company or by mailing to the server supplier.(POP3/SMTP server)2.Set the mail list which you want to send to whe

39Online UserTOOLBOX1.Firmware Version : The current firmware version. You can click on “Find” button to get the latest firmware from PC and press

Step 1：Enter IP address that you want to connect.(example)You can also connect Video Web Server via browser. This function is suitable in both WIN 200

1.Image transmission rate per second2.Data transmission rate3.Video Channel4. Resolution :D1、CIF5.Image quality : High、Middle、Low6.Number of online us

SELECTThis device allows user to get the ideal view size.ÆPress , button to make different view size.ÆPress “ Select ” then “ Left ”

RS232 REMOTE PROTOCO43KEY LOCKFor further security, you can “Lock” all buttons on your DMR. Locking disables the buttons and prevents other people fro

SPECIFICATIONSX Specifications are subject to change without notice.* 4 audio inputs, but only can select 1 during operation for recording** with 2 mo

Please follow the next steps carefully in order to ensure correct installation.The compartment located on the front panel of the DMR is the removable

FEATURESDMR Features•Remote control via the internet •Wavelet Compression Format replaces Time-Lapse VCR + Multiplexer• 4 Audio inputs / 2 Audio outp

4.5.46Secure the HDD in the Casing (optional)Use the supplied screws and tighten them, positioning the HDD into place.Slide the top Cover over the Car

47Screws and brackets for rack mounting applications can be purchased as an optional accessory.Side View with Rack MountFront Angle with Rack MountAPP

48The Recording Time is different based on Recording Speed and Recording Quality. Please refer to following table.XNTSC SYSTEMXPAL SYSTEMNote: Above d

APPENDIX #4 – PIN CONFIGURATIONS4925 pin com portDMREXTERNAL ALAM NOEXTERNAL ALARM COMPIN OFFALARM INPUT 9ALARM INPUT 10ALARM INPUT 11ALARM INPUT 12AL

EXTERNAL I/OPOWER75Ω 2CALLLOOPINPUTRISK OF ELECTRIC SHOC K DO NOT OPENWARNING : TO REDUC E THE RISK OF ELECT RIC SHOCK, DO NOT REMOVE

3FRONT PANEL1. REMOVABLE HDD CARTRIDGEPlease refer to page.45 Appendix #1.2. LED LIGHTThe LED Light is ON under following condition.‧HDD : HDD is acti

410. RECPress REC to start recording. 11. STOP / DOWN‧STOP : Under DMR Record / Play mode, it can stop the moment action.‧DOWN : Under setup mod

51. POWER Please use the provided adaptor to connect power cord (Other adaptor is not suitable for this machine).2. EXTERNAL I/O‧Controlled remotely b