Maxtor Digital Multiplex Recorder Manual do Utilizador

Digital Multiplex RecorderUSER’S MANUAL777 W V1.0Please read the instructions thoroughly before operation and retain it for future reference.

Connect the AC Power Cord with Power Adapter and plug into an electrical outlet. The Red LED indicator light will be ON and the DMR is in Standby mode

PLAYPress “ PLAY ” button, the DMR will show the last recording.1. FAST FORWARD (F.F. ) & FAST REWIND (F.R.)You can increase speed for Fast Forwar

Detailed Menu SetupMENU8LAST RECORDFULL LISTALARM LISTMOTION LISTTIME SEARCHSEARCHDAYSTARTENDQUALITYIPSTIMER ENABLETIMERHDD OVERWRITERECORD IPSRECORD

The Menu allows you to configure your DMR settings. Please follow the steps below to access the Menu :Press the Menu button. The password screen will

MENU OPTIONSSYSTEM101. AUDIO INPUTTo choose one of 4 channels to record. (can only select 1 during operation for recording)2. INT AUDIBLE ALARMTo set

11. NEW PASSWORD : XXXX (Default password : 0000)To set the new password.12. CLEAR HDDDelete all the contents of your HDD. When you choose “YES” on th

12TIMER1. DAYSelect the day, or days of the week (Mon–Fri / Sat-Sun / Daily) that you wish to schedulethe DMR to auto recording.NOTE : 1.Special Date

13RECORD1. HDD OVERWRITESelect “YES” to overwrite previous recording video in HDD. NOTE : When the HDD is full under O/W Recording mode, previous reco

NETWORK(MENU)SEARCHTIMERRECORDCAMERA SYSTEMEVENT► NETWORKPress the “▲”“▼””◄”“►”buttons to move the cursor.Press the “+”“-”buttons to change the digit.

MOTION DETECTION SETUP1. Press “ MENU “ to enter the menu set up, then “ Down ” to CAMERA setup.2. Press “ENTER” twice to enter the Motion Detection S

The lightning flash with arrowhead symbol, within an equilateraltriangle, is intended to alert the user to the presence ofuninsulated"dangerous v

16Figure 1 MOTION DETECTION SETUP12 3 4 5 6 7 8 9 10 11 12 13 14 15---- -- -- -- -- -- -- -- -- -- -- -- -- --03212 3 4 5 6 7 8 9 10 11 12 13 14 15---

17HARDWARE CONNECTION AT DMR SIDENetwork Setting GuideDirect Connect with PCDirect Connect with PCRemote Connect Via InternetRemote Connect Via Intern

18STEP1: Software installation1.Put the attached CD into a CD-ROM and it will start to install the application program on Windows PC.2. Press “Next”.S

4.Set program shortcuts setting and press “Next”.5.Press “Next” to copy files6.After the installation, there are 6 files and 1 folder in yourassigned

Step2 : Static IP setting In DMR MENU / NETWORK set IP ADDRESS, GATEWAY, NET MASK, DNS and WEB PORT which are provided from your local ISP ( interne

21Click twice and enter your User name, Password (Note: If you never change the “Account” before, the default user name and password are b

DYNAMIC IP SETTING223.Choose destination location and press “Next”.Step1 : Software installation1.Put the attached CD into a CD-ROM and it will start

4.Set program shortcuts setting and press “Next”.5.Press “Next” to begin copying files236.After the installation, there are 6 files and 1 folder in y

Step2 : DDNS apply1. Click on free site “http://www.dyndns.org” (please look at the example below, you can also apply DDNS in other DDNS web page) and

3. Register the information and click on “Create Account”4.After registering your account, you will receive an e-mail, which contains instructions to

What Do You GetWhat Do You Get??• FEATURES--------------------------------------------------------------------------------------• PACKAGE INCLUDING --

6.Click on“Account” and “Add Host”7 Users can set up their own DDNS HOST. For example, the user’s applied Host nameis “TEST”. And then press “Add Ho

2. Network setting for PC. (The instruction is based on Win XP O/S. If your O/S is Win 2000 or Win 2003, the setup procedure is similar to that of

4.Click on “INTERNET PROTOCAL (TCP/IP)” , then select “Properties” to setup5.Choose “Obtain an IP address automatically”6. Enter “Command Prompt”28.

8. Close the window in the above step. Enter the IP address (router’s gateway : 192.168.1.1 ) to log in to the router from internet explore. And then

Step4 : Router settingNOTE : In the router setting, we have four steps as follows. 1. Dial setting2. DHCP setting3. Virtual server setting4. DDNS sett

3. In “ADVANCED SETUP / Virtual Server”. Choose “By Port” and set “Port Number” to 80 for DMR. And set “Local Server IP Address” to 192.168.1.10. P

32In DMR MENU / NETWORK set SERVER IP, GATEWAY, NET MASK, DNS andWEB PORT. Step 5 : IP settingStep6 : Connect routerFor example(MENU)SEARCHTIMERREC

2. Click twice and enter your User name, Password and host(Note : The default User Name and Passwordare both “admin”). Then click OK to co

Step 1：Click twice to enter Login setup (please refer to “software installation”)Step 2：Key in “User Name” and “ Password”. Click “OK” to establish th

35A. Video Web Server control panel1. Image transmission rate per second2. Data transmission rate3. Connection/Disconnection4. Resolution : D1、CIF5. I

TABLE OF CONTENTSAdvanced OperationAdvanced Operation• OPERATION OPTIONS -----------------------------------------------------------------------• KEY

B. Digital device control panel1. CH1-16,2. 4cut, 7cut, 9cut, 10cut, 13cut,16cut, PIP3. Zoom, Select, Lock, Record4. Stop, Rewind, Fast Forward, Pause

Please find a recording file in the PC and click twice on it to playback.1. On Screen Display2. Snapshot3. Stop4. Pause5. Slow (1/2X, 1/4X, 1/8X, 1/16

ADVANCED SETTINGClick “System Config” for advanced setting.SYSTEM CONFIGNOTE :Apply--After changing all setting, press “apply” to refresh the data.Reb

391.You can get all the data from the ISP company or by mailing to the server supplier.(POP3/SMTP server)2.You should set the mail list which you

40Online UserTOOLBOX1.Firmware Version : The current firmware version. You can click on “Find” button to get the latest firmware from PC and press

Step 1：Enter IP address that you want to connect.(example)You can also connect Video Web Server via browser. This functionis suitable in both WIN 2000

42Step 3：After you login, you will see as below. (example)123 45 6 7 891011121314151.Image transmission rate per second2.Data transmission rate3.Video

SELECTThis device allows user to get the ideal view size.àPress , , button to make different view size.àPress “ Select ” the

RS232 REMOTE PROTOCOL44KEY LOCKFor further security, you can “Lock” all buttons on your DMR. Locking disables the buttons and prevents other people fr

TROUBLE SHOOTING45Video formatNTSC/EIA or PAL/CCIRNetwork InterfaceEthemet(10/100 Base-T)ProtocalsTCP/IP, ICMP, SMTP, HTTP, FTPTrigger & ActionE-M

FEATURESDMR Features•Remote control via the Internet•Wavelet Compression Format replaces Time-Lapse VCR + Multiplexer• 4 Audio inputs / 2 Audio output

Please follow the next steps carefully in order to ensure correct installation.The compartment located on the front panel of the DMR is the removable

4.5.47Secure the HDD in the Casing (optional)Use the supplied screws and tighten them, and positioning the HDD into place.Slide the top Cover over the

48Screws and brackets for rack mounting applications can be purchased as an optional accessory.Side View with Rack MountFront Angle with Rack MountAPP

49The Record Time is different based on Record Speed and Record Quality. Please refer to following table.NTSC SYSTEMPAL SYSTEMNote: Above data is from

APPENDIX #4 – PIN CONFIGURATIONS5025 pin com portDMREXTERNAL ALAM NOEXTERNAL ALARM COMPIN OFFALARM INPUT 9ALARM INPUT 10ALARM INPUT 11ALARM INPUT 12AL

21. Connect cameras and monitor with the DMR.2. Shown below is one example for connecting the DMR to your existing Observation System.3. Install HDDs(

3FRONT PANELRECSELECTMENUENTERZOOM SLOWALARMHDDFullHDDTIMERPLAYRECDownLeftRightPOWER1672 4 61 538 10 12 149 11 13 15Up1. REMOVABLE HDD CARTRIDGEPlease

49.7, 9, 10, 13 channels display mode 10.16 channels display mode 11. LED LIGHTThe LED Light is ON under the following conditions.•HDD : HDD is activa

51. POWERPlease use the provided adaptor to connect power cord (Other adaptors are not suitable for this machine).2. EXTERNAL I/O•Controlled remotely